BRUTE Tile Adhesive

BRUTE Tile Adhesive is a cement based tile adhesive and concrete wall renders. It is suitable for fixing all types of ceramic and mosaic tiles to interior and exterior concrete walls and floors. BRUTE Tile Adhesive is suitable for renders (palitada) without chipping (smooth surface) that avoid future delamination (kapak).
Recommended all kinds of tiling works for bathrooms, living and dining halls, shopping malls, mess halls and other related work.

• Easy Application
• Prevents plaster future delamination

BRUTE Tile Adhesive is cement based thin bed bonding adhesive and concrete wall renders. Brute is made of Portland cement and selected mineral stone. It is suitable for fixing all types of ceramic on concrete wall and floor, both interior and exterior use with good workability. Brute is recommended for renders (palitada) that avoid future delamination (kapak) and is suitable for bathrooms, living and dining halls, shopping malls, mess halls etc. and places where tiling is required.

Application

SURFACE PREPARATION is important for good adhesion. For effective application of Tiling and Renders, preparation for concrete substrate is essential. Make sure the substrate is clean, flat solid and free from dust, oil, wax, grease etc. Clean surface with water prior to application.

Step 1: Clean the surface thoroughly with water (To saturate and lower temperature up to 25°C)
Step 2: Add water to mix. Let it stand for 3 to 5 mins then re-stir. DO NOT ADD WATER AFTER MIXTURE IS SET
Step 3: Apply BRUTE as screed for approximately 3mm THICK using RIBBED SIDE of the notched trowel
Step 4: Apply tile to set firmly by moving the tile BACK AND FORTH to cover the entire back bed tile to avoid future delamination.
Step 5: Let it dry. (Mortabond Rainbow Tile Grout may be applied the following day)

Coverage Ratio: 25kgs Tile Adhesive: 7 to 8 sq.m.

Mixing Ratio: 5 liters of water to 25kg of BRUTE Tile Adhesive & Renders