Mortabond Premium Tile Adhesive

Premium mortabond

Mortabond Premium Tile Adhesive is an advanced German formulation that is cement based, high UV resistance, thin application for bonding tiles.

Mortabond Premium Tile Adhesive uses selected quality silica sand as fillers with excellent bonding property and good workability.
It is easy to apply and is suitable for interior and exterior floors and walls. Premium Tile Adhesive is perfect for fixing tile works, grouting crack repair, joint fillers for pre-cast walls and slabs.

  • Excellent bonding
  • High UV resistance
  • Anti-Slip Property
  • Crack Repairs
  • Tile on Tile applications

Mortabond Premium Tile Adhesive is an advanced formulation German Technology. Cement based thin bed application for tile bonding adhesive with high UV resistance.
Premium uses selected quality silica sand as fillers with excellent bonding property and good workability.
Easy to apply and suitable for interior and exterior use.

Recommended for: fixing tile works, grouting for crack repair, joint fillers for pre-cast walls and slabs.

Application

SURFACE PREPARATION is important for good adhesion.

For effective application of Mortabond Premium Tile Adhesive, preparation for concrete substrate is essential. Make sure the substrate is clean, flat solid and free from dust, oil, wax, grease etc.
Clean surface with water prior to application.

Following Steps:

  1.  Clean the surface thoroughly with water (To saturate and lower temperature up to 25°C)
  2.  Add water to mix. Let it stand for 3 to 5 mins then re-stir. DO NOT ADD WATER AFTER MIXTURE IS SET
  3.  Apply Mortabond Premium as screed for approximately 3mm THICK using RIBBED SIDE of the notched trowel.
  4.  Apply tile to set firmly by moving the tile BACK AND FORTH to cover the entire back bed tile to avoid future delamination.
  5. Let it dry. (Mortabond Rainbow Tile Grout may be applied the following day)

Coverage Ratio: 25kgs Tile Adhesive: 7 to 8 sq.m.

Mixing Ratio: 5 liters of water to 25kg of Mortabond Classic Tile Adhesive

 

Technical Data and Properties

Appearance  Powder
Color Light Gray
Properties: Cementitious
Toxicology Non-Toxic
Odor  Odorless
Work-ability Good
Water Demand  5 liters/25kgs
Setting Time:
Initial 480 mins.
Final 700 mins.
Curring Time:  28 days
Anti-Sagging Property 0.1mm
Compression Strength (3mm) 28 days: 273 kgs/cm²
Flexural Strength 28 days:  66 kgs/cm²
Tensile Strength (3mm) 28 days: 0.81 N/mm²

Mortabond Premium Tile Adhesive

Premium mortabond

Mortabond Premium Tile Adhesive is an advanced German formulation that is cement based, high UV resistance, thin application for bonding tiles.

Mortabond Premium Tile Adhesive uses selected quality silica sand as fillers with excellent bonding property and good workability.
It is easy to apply and is suitable for interior and exterior floors and walls. Premium Tile Adhesive is perfect for fixing tile works, grouting crack repair, joint fillers for pre-cast walls and slabs.

  • Excellent bonding
  • High UV resistance
  • Anti-Slip Property
  • Crack Repairs
  • Tile on Tile applications

Mortabond Premium Tile Adhesive is an advanced formulation German Technology. Cement based thin bed application for tile bonding adhesive with high UV resistance.
Premium uses selected quality silica sand as fillers with excellent bonding property and good workability.
Easy to apply and suitable for interior and exterior use.

Recommended for: fixing tile works, grouting for crack repair, joint fillers for pre-cast walls and slabs.

Application

SURFACE PREPARATION is important for good adhesion.

For effective application of Mortabond Premium Tile Adhesive, preparation for concrete substrate is essential. Make sure the substrate is clean, flat solid and free from dust, oil, wax, grease etc.
Clean surface with water prior to application.

Following Steps:

  1.  Clean the surface thoroughly with water (To saturate and lower temperature up to 25°C)
  2.  Add water to mix. Let it stand for 3 to 5 mins then re-stir. DO NOT ADD WATER AFTER MIXTURE IS SET
  3.  Apply Mortabond Premium as screed for approximately 3mm THICK using RIBBED SIDE of the notched trowel.
  4.  Apply tile to set firmly by moving the tile BACK AND FORTH to cover the entire back bed tile to avoid future delamination.
  5. Let it dry. (Mortabond Rainbow Tile Grout may be applied the following day)

Coverage Ratio: 25kgs Tile Adhesive: 7 to 8 sq.m.

Mixing Ratio: 5 liters of water to 25kg of Mortabond Classic Tile Adhesive

 

Technical Data and Properties

Appearance  Powder
Color Light Gray
Properties: Cementitious
Toxicology Non-Toxic
Odor  Odorless
Work-ability Good
Water Demand  5 liters/25kgs
Setting Time:
Initial 480 mins.
Final 700 mins.
Curring Time:  28 days
Anti-Sagging Property 0.1mm
Compression Strength (3mm) 28 days: 273 kgs/cm²
Flexural Strength 28 days:  66 kgs/cm²
Tensile Strength (3mm) 28 days: 0.81 N/mm²