DuraPlas Lite Skimcoat

Premium mortabond

DuraPlas Lite Skimcoat is a German Technology coating for plastered wall surfaces. It helps achieve a smooth and even surface prior to painting. DuraPlas Lite Skimcoat fills hair-line and spider cracks. DURA-PLAS Lite Skimcoat has high initial adhesion making it ideal for overhead applications.

  • No concrete neutralizer needed
  • High UV resistance
  • Non-toxix and Non-Hazardous
  • High initial adhesiveness
  • For interior and exterior surfaces
  • Bubble free property
  • Non-powder when dry

DuraPlas Lite Skimcoat is a German Technology coating for plastered wall surfaces. It helps achieve a smooth and even surface prior to painting. DuraPlas Lite fills hair lines and spider cracks; moreover its high initial adhesiveness make it ideal for overhead applications.

SKIMCoat is a German Technology formulated as smooth coating for plastered wall. An Ultra Thin SKIMCoat application helps transform rough and uneven surface to a flat and even surface. Its high initial adhesion and non-sag properties makes it ideal for overhead applications.

Application

SURFACE PREPARATION is important for good adhesion. For effective application of Dura-Plas Lite, preparation for concrete substrate is essential. Make sure the substrate is clean, flat solid and free from dust, oil, wax, grease etc. Clean surface with water prior to application.

Step 1: Make sure that plastering is structurally sound. Repair all cracks and dents on surface (optional)

Step 2: Clean the surface thoroughly with water (Lower the temperature up to 25°C)

Step 3: Add water to mix. Let it stand for 3 to 5 mins then re-stir. DO NOT ADD WATER AS MIXTURE IS SET

Step 4: Apply 1st layer using finishing trowel in a FORCIBLY PRESSING DOWN MOTION to fill cracks

Step 5: Apply 2nd thin layer as topping, and then let dry

Step 6: Sanding surface after 24 hrs to attain smooth even surface.
AVOID CONTINUOUS HEAVY SANDING

Step 7: Wash down the surface with water and let dry.

Step 8: Apply topcoat paint

Coverage Ratio: 1mm thick per sq.m. : 1 to 1.25kgs Duraplas Lite

Mixing Ratio: 9 liters of water to 20kg of Dura-plas Lite

Color: White and Gray.